NF F13-012-3-1991 铁路车辆.铁路车辆的空调系统舒适度的测定.电气试验

上一篇: NF F13-012-1-1991 铁路车辆.铁路车辆的空调系统舒适度的测定.通风试验
下一篇: NF F13-012-5-1991 铁路车辆.铁路车辆的空调系统舒适度的测定.安全性试验

【英文标准名称】:Mobileandlocomotivecranes;Addenda
【原文标准名称】:汽车起重机和机车起重机.附录
【标准号】:ASMEB30.5bAddenda-1996
【标准状态】:作废
【国别】:美国
【发布日期】:1996
【实施或试行日期】:
【发布单位】:美国机械工程师协会(ASME)
【起草单位】:ASME
【标准类型】:()
【标准水平】:()
【中文主题词】:铁路用;提升装置;检验;塔式起重机;安全;提升设备;汽车起重机;起重机;维修;定义;定义;电动的;安装;规范
【英文主题词】:liftingequipment;definition;installations;towercranes;specification;inspection;power-operated;liftingdevices;cranes;definitions;safety;maintenance;railwayapplications;mobilecranes
【摘要】:
【中国标准分类号】:J80
【国际标准分类号】:53_020_20
【页数】:7P;A4
【正文语种】:英语


Product Code:SAE J537
Title:Storage Batteries
Issuing Committee:Battery Standards Starter Battery Committee
Scope: This SAE Standard serves as a guide for testing procedures of automotive 12 V storage batteries and as a publication providing information on container holddown configuration and terminal geometry.The ratings submitted are to be based on procedures described in this document. The ratings submitted must be of a level that when any subsequent significant sample is tested in accordance with this document, that at least 90% of the batteries shall meet the ratings. The choice of 90% compliance recognizes that batteries consist of many plates and require chemical-electrical formation procedures and small variations in test conditions and procedures can affect the performance of individual batteries.Future Considerations - In order to expedite the release of this revision of the Standard, several topic areas were deferred for consideration in future revisions. These items include, but may not be limited to, the following: post dimension modifications, battery technology agnosticism, and a new, more application relevant charge acceptance test.
Rationale: This SAE Standard serves as a guide for testing procedures of automotive 12 V storage batteries and as a publication providing information on container holddown configuration and terminal geometry.The ratings submitted are to be based on procedures described in this document. The ratings submitted must be of a level that when any subsequent significant sample is tested in accordance with this document, that at least 90% of the batteries shall meet the ratings. The choice of 90% compliance recognizes that batteries consist of many plates and require chemical-electrical formation procedures and small variations in test conditions and procedures can affect the performance of individual batteries.Future Considerations - In order to expedite the release of this revision of the Standard, several topic areas were deferred for consideration in future revisions. These items include, but may not be limited to, the following: post dimension modifications, battery technology agnosticism, and a new, more application relevant charge acceptance test.