HB 4502-1990 高扭矩十字槽旋具(用于机动)
作者:标准资料网 时间:2024-05-29 18:14:13 浏览:8553
来源:标准资料网
基本信息
标准名称: | 高扭矩十字槽旋具(用于机动) |
中标分类: |
机械 >>
工艺装备 >>
手工工具 |
发布日期: | 1990-09-18 |
实施日期: | 1990-12-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
出版日期: | 1900-01-01 |
页数: | 5页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 工艺装备 手工工具
基本信息
标准名称: | 滚动轴承 推力轴承 公差 |
英文名称: | Rolling bearings--Thrust bearings--Tolerances |
中标分类: |
机械 >>
通用零部件 >>
滚动轴承 |
ICS分类: |
机械系统和通用件 >>
轴承 >>
滚动轴承
|
替代情况: | GB/T 307.4-1994;被GB/T 307.4-2012代替 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 |
发布日期: | 2002-10-11 |
实施日期: | 2003-05-01 |
首发日期: | 1994-12-27 |
作废日期: | 2013-03-01 |
主管部门: | 中国机械工业联合会 |
提出单位: | 中国机械工业联合会 |
归口单位: | 全国滚动轴承标准化技术委员会 |
起草单位: | 洛阳轴承研究所 |
起草人: | 宋玉聪 |
出版社: | 中国标准出版社 |
出版日期: | 2003-05-01 |
页数: | 平装16开, 页数:7, 字数:14千字 |
书号: | 155066.1-19071 |
适用范围
GB/T 307的本部分规定了符合GB/T 273.2-1998的平底推力轴承的外形尺寸(倒角除外)公差和旋转精度公差。本部分不适用于某些推力轴承(如推力滚针轴承);也不适用于特殊应用场合下使用的推力轴承(如特殊精度轴承)。推力轴承的倒角尺寸最大值规定在GB/T 274-2000中。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 通用零部件 滚动轴承 机械系统和通用件 轴承 滚动轴承
Product Code:SAE MAM2263
Title:Tolerances, Metric, Nickel, Nickel Alloy, and Cobalt Alloy Tubing
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers established metric manufacturing tolerances applicable to seamless and welded thin-wall aircraft tubing of nickel, nickel alloys, and cobalt alloys ordered to metric dimensions. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. The term "excl" is used to apply only to the higher figure of a specified range.